KX-TAW848 Panasonic Refurbished Wireless Cell Phone System 4x4 Max 8x48

Panasonic KX-TAW848 main unit is initially configured (4 X 4) with 4 hybrid extension ports and 4 loop start CO ports (1 LCOT card). The KX-TAW848 phone system is expandable to 8 COs and 24 wired extension ports (28 by parallel connecting 4 analog stations to the hybrid card) and 28 wireless handsets. Unit is very similar in physical design and feature set of the KX-TDA50 system (requires a certified Panasonic KX-TDAdealer for installation and registration). Primary difference is that it uses analog phones (KX-T7700 series) but allow for wireless cell telephones (portable stations) that are typically reserved for digital systems. KX-TAW848 is the perfect solution for luxury homes that need multi-line cordless phones and cover large amount of space. Just released, version 3.0 for the KX-TAW848 system with new enhanced software making this Panasonic wireless solution even better. Easy PC based programming via USB on the KX-TAW848.

KX-TAW848 Features:

• Multi-Call wireless only available on KX-TAW848 or KX-TDA systems
• Toll restriction
• Automatic route selection (ARS)
• KX-TAW84893 Caller ID ANI and CNIP
• Voice mail integration
• Direct inward system access (DISA)
• MOH port
• Paging port (announce calls over your speaker system)
• RS232 port for SMDR (third-party call account logging)
• USB port for easy PC programming
• SD storage card included
• Powerfail operation: Ports 1 and 2 of the pre-installed CO card are connected to ports 1 and 2 of the pre-installed station card for use by SLT (single line telephones)
• The KX-TAW848 PBX supports all of the following Panasonic phones
• KX-T7000 series (KX-T7030, KX-T7020, KX-T7050):
• Analog proprietary telephones (e.g., KX-T7737, KX-T7736, KX-T7731, KX-T7750, KX-T7720, KX-T7737B, KX-T7736B, KX-T7731B, KX-T7750B, KX-T7720B)
• Portable stations (e.g., KX-TD7690 or KX-TD7680)
• DSS consoles (e.g., KX-T7740 or KX-T7740B)
• KX-TAW848 supports PC-Based programming and requires:
• Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
• CPU: 133 MHz Intel Pentium or faster
• RAM: At least 64 MB of available RAM (128 MB recommended)
• Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of additional space for user files